Best Construction Machinery Supplier Penang

COMPRESSOR Type Rotary Twin Screw, Single-Stage, Oil-cooled Free air delivery (m3/min) 21.2 Rated operating pressure
(MPa)[kgf/cm2][psi] 0.7[7.

COMPRESSOR Type Rotary Twin Screw, Single-Stage, Oil-cooled Free air delivery (m3/min) 2.8 Rated operating pressure
(MPa)[kgf/cm2][psi] 0.7[7.

Scaffolding is a movable platform for workers (such as bricklayers, painters, or miners) to stand or sit on when working at a height above the floor or ground. Scaffolds are widely used on site to get access to heights and areas that would be otherwise hard to get to.

JHI SERIES (STANDARD)

- VIBRATOR TYPE : JHI SERIES

- DESCRIPTION : ECONOMIC VIBRATOR 

- CONNECTOR TYPE : PIN / HORN COUPLING

- VIBRATOR LENGTH (m) : 5m

- SIZE (mm) : 38, 45, 50

- HEAD ASSEMBLY : 1 PC BEARING

- V.P.

• Designed to smooth the concrete floor.
• Small holes and slight high spots can be levelled by trowelling process.
• Finishing Blades: use to produces a slab that is dense, durable and smooth. In many instances contractors will burnish the slab causing it to have a mirror-like appearance.

YANMAR TOWER LIGHT BALLOON 
DESCRIPTION

• Input frequency , almost every country accepts 
• restrike time , become shorter 5 to 10 minutes
• minimal flicker , friendly to your eyes
• voltage control capability , provided a certain amount of brightness 

• FROM THE WAVY

4'' & 6'' SLUDGE PUMP / WATER PUMP C/W DIESEL ENGINE
TSLP-150  6inch sludge pump specially designed to handle clean or dirty water containing limited solids, and mostly use extensively on construction site fo dewatering
TSLP-10  is automatic priming and re-priming , is by flood a lubricating rotary sliding vane vacuum pump
FEATURES

Description Model: THP4 + HPPRV165

Toku THP4 + HPPRV165 is a hydraulic submersible pump driven by diesel engine.

• The hydraulic power unit (HPP) is located high above the pump and connected via hydraulic hoses.
• The pump is submerged in the liquid being pumped and is powered by circulating hydraulic fluid.

Airman Generator Specifications
Generator- Model: SDG125S

• Prime output: 100 KVA
• Standby Output: 125 KVA
• Voltage: 415V
• HINO Engine
• Power factor: 80%
• Class of rating: Continuous
• Alternator: Brushless  (with A.V.

SPECFICATION ENGINE DIESEL RV70 MODEL RV70N Type 4 cycle - 1 cylinder - horizontal Bore x Stroke (mm) 80 x 75 Displacement (cm3) 376 Continuous output (HP/r.p.

SR.NO. DIESEL ENGINE BODY NUMBER TYPE & MARK RATED OUTPUT HP (KW) RATED SPEED (RPM) NO. 0F CYCLE BORE X STROKE (MM) CUBIC CAP (CC) SPECIFIC FUEL CONSUMPTION LOAD (SFC)        WEIGHT   1 KS-6 IDI, TRB, CIP, CIG 6 (4.4) 650 1 114.3X137.

MODEL TKPLH300R
DESC LIFTING HOIST : 

• ENGINE DRIVEN MATERIAL HOIST IS MOST CONVENIENT TO USE IN SMALL RENOVATION WORK 
• THE FLEXIBILITY IN TERMS OF LOAD CAPACITY , LIFTING HEIGHT  AND SPEED MAKES THEM SUITABLE FOR A WIDE RANGE OF INDUSTRIES AND LIFTING REQUIREMENTS
• LIFTING HOIST WAS DESIGN IMPROVED WITH SECURITY AND SAFETY TO

MODEL : TKC350 WITH HONDA GX390 PETROL ENGINE 13(hp) INCLUDED 14'' DIAMOND BLADE x 1PC

FEATURES : 

• Low Fuel Consumption 
• Easy Depth adjustment 
• durable 

• backfilling work 
• embankment 
• Road repairing work 
• general

Model: TK YM7T Toku TK7TMSD concrete mixer with 5HP air-cooled , come with diesel engine.

CONCRETE MINI MIXER
SKU: YMM350
SPECIFICATIONS Model YMM350 Capacity - Unmixed 125 litres (3-1/2 cu.ft.) Capacity - Mixed 95 litres (2-1/2 cu.ft.

MIKASA REVERSIBLE MVH-308GH COMPACTOR PLATE

Reversible Compactor with VAS handle
●Smooth forward and reverse drivability.
●VAS handle to reduce hand-arm vibration : patented.
●Forward/Reverse control lever : patented.
●Integrated vibrating plate.
●Cyclone air filter to extend engine life and reduce maintenance.

SPECIFICATION BAR BENDER 42MM
  MODEL TKBB-42 MAXIMUM BAR DIAMETER (mm) VIKYNO RV-125 OR RK-125 ENGINE TYPE HORIZONTAL WATER COOLED 4CYCLE DIESEL ENGINE  RATED OUTPUT (hp/rpm) 12.

Model: FBB50-RV125

Fuji FBB50-RV125 is a heavy duty bar bender operated with Vikyno diesel engine.

FUJI FBC42RV125 is a heavy duty bar cutter operated with diesel engine Vikyno RV125.

• Compact in structure, simple operation by only feeding bars and pedalling a treadle.

Model: FBB65-RV165
Fuji FBB65-RV165 is a heavy duty bar bender operated with Vikyno diesel engine. Model: FBC65RV165

FUJI FBC65RV165 is a heavy duty bar cutter operated with diesel engine Vikyno RV165.

FEATURES
FRB19 IS SPECIALLY DESIGN TO BEND RINGS FROM 19MM TO 20MM BY CHANGING DIFFERENT SIZES OF FULCRUM ROLLER PROVIDED .

• Easy and convenience operation .
• portable and compact size .
• low maintenance and cost saving .

FEATURES
TKRB16 IS SPECIALLY DESIGN TO BEND RINGS FROM 13MM TO 16MM BY CHANGING DIFFERENT SIZES OF FULCRUM ROLLER PROVIDED .

• Easy and convenience operation .
• portable and compact size .
• low maintenance and cost saving .